× Search


Wireless Telecom Group Awarded $1.5M Contract From The United States Navy

Posted December 7, 2010

SuperUser Account 0 893

Boonton Electronics has been awarded a contract with the Department of the United States Navy to supply Boonton’s 4500B RF Peak Power Meter in support of a Naval Sea Systems Command project.  The total value of the contract is approximately $1.5M and a considerable portion of the order is expected to be realized over the next two years.

Signal-to-Noise, Carrier-to-Noise, EbNo Webinar - Wolfgang Damm

Posted November 2, 2010

SuperUser Account 0 969

Data transmission is often conducted under very difficult circumstances; weak signals that transport high data rates within an unfavorable noise environment have to be recognized by receivers. Furthermore, data streams have to be transmitted reliably and with low BER. Designers, developers and system engineers have to take less-than-ideal circumstances in consideration when they design their circuits or monitor their system.

New 4240 CW Power Meter

Posted October 28, 2010

SuperUser Account 0 1196

The 4240 series is offered as one channel (4241) or two channel (4242) instrument. Both meters come with an integrated calibrator that provides an ultra-stable, 50-MHz reference signal, and deliver a calibration power range from -60dBm to +20dBm. A built-in calibrator allows sensor calibrations right before the measurement providing highest measurement accuracy.

New 60 GHz Noise Figure Test Set

Posted June 8, 2009

SuperUser Account 0 1166

Noisecom has developed a precision NF-test-set for 60G devices. The systems consists of precision noise sources that cover the 60G band, isolators for best VSWR match, and very low noise amplifiers with 30 dB gain to increase the output of the DUT, if it is too low for direct measurement.

Targeting the RF Market, An Exclusive Interview with a Technical Leader

Posted August 1, 2007

SuperUser Account 0 876

Monty Johnson joined Wireless Telecom Group in January 2006 as CEO and Vice Chairman. With more than 25 years in the telecommunications industry, he has extensive experience in delivering network services to the world’s largest wireless and wireline carriers. Prior to joining Wireless Telecom Group, Johnson served as president and GM of Tekelec’s Network Signaling Group.

New NC1127A & NC1128A Noise Modules for Computing Equipment Market and Military

Posted July 26, 2007

SuperUser Account 0 1617

With their white Gaussian frequency distribution, Noise Com’s noise modules are further utilized as a random jitter source for sophisticated technical performance measurements of high-speed-serial-data busses. These busses are quickly overtaking parallel bus standards in computers, cell phones, entertainment systems, test and measurement equipment and many other products because of their superior performance to cost ratio.

Introducing the Noisecom J7000 Series Jitter Test System

Posted July 26, 2007

SuperUser Account 0 886

The NoiseCom J7000 Jitter Test System is a powerful test instrument to alter serial signal streams through injection of Gaussian noise in a way that reflects real world signal behavior. To evaluate performance of components and systems, the J7000 is capable of adding precise amounts of white noise to the signal stream that allows the measurement of Signal-to-Noise ratio (SNR), Carrier-to-Noise ratio (CNR) and Bit-Error-Rate (BER).

New Certified HD Radio Signal Generator

Posted August 7, 2006

SuperUser Account 0 989

The DSG9000 series are HD Radio signal sources designed to play back pre-recorded vector files or test signals that replicate HD Radio service modes and channel configurations. These instruments are certified by iBiquity Digital Corporation, the sole developer and licenser of digital HD Radio technology.


Theme picker


25 Eastmans Road
Parsippany, NJ 07054
United States
Phone: +1 (973) 386-9696
Fax: +1 (973) 386-9191

Contact Us

Terms Of UsePrivacy StatementCopyright 2022 by Wireless Telecom Group, Inc.
Back To Top